User's Manual

P a g e | 23
DP760 User Manual
Software Version
 Firmware Status: Displays the status of the firmware loaded.
 Check for new firmware: Check configured server for most recent firmware
version and compare to current version. After pressing button, you must
reload this page to display status (navigate to a different page and then back
to this page) and check firmware availability.
 Boot: Specifies Boot version. Current is 1.0.3.7
 Core: Specifies Core version. Current is 1.0.3.7
 Base: Specifies Base version. Current is 1.0.3.7
 Prog: Specifies Prog version. Current is 1.0.3.7. This is the main firmware
release number, which is always used for identifying the software system of
the DP760.
 Locale: Specifies Locale version. Current is 1.0.3.7
 Recovery: Specifies Recovery version. Current is 1.0.3.7
System Up Time
Indicates system uptime since last reboot.
System Time
Shows actual time and date according to your configuration.
Service Status
Reveals status of VoIP applications.
Core Dump
Provides generated core dump file if unit malfunctions. Normal will be displayed if
no issues.
DECT Page Definitions
Table 6: DECT Page Definitions
General Settings
Repeater Name
Configures the name of the repeater station.
Default is DP760_[last 6 digit of MAC address].
Manually
Configured Base
RFPI
Configures manually RFPI of DP750 base station to connect to. If empty, the
repeater station DP760 will search for DP750 base stations and connect
automatically to the first one found.
Use Manually
Configured RFPI
Permits to use manually configured RFPI (if non-empty) when set to “Yes”.
If set to “No”, the DP760 will search for a DP750 to connect to, regardless of
manual configuration.