User's Manual
Table Of Contents
- Users Manual DP760
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- CONFIGURATION GUIDE
- DP760 DECT REPEATER ASSOCIATION WITH DP750
- DP760 DECT REPEATER DISSOCIATION
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING THE DP760
- Users Manual DP760 FCC
P a g e | 25
DP760 User Manual
Layer 2 QoS
802.1p Priority
Value for SIP
signaling
Sets layer 2 QoS 802.1p priority value for SIP signaling.
Default is 0.
Layer 2 QoS
802.1p Priority
Value for RTP
media
Sets layer 2 QoS 802.1p priority value for RTP media.
Default is 0.
UPnP Discovery
Settings
Enable UPnP
discovery
Enables UPnP discovery feature. Default is Yes.
UPnP discovery
notify interval
Specifies in seconds the interval to send out SSDP notifies.
Default is 30 .
Maintenance Page Definitions
Table 8: Maintenance Pages Definitions
Firmware Upgrade
Firmware Upgrade
and Provisioning
Selects how firmware upgrade request will be sent: “Always Check for New
Firmware”, “Check New Firmware only when F/W pre/suffix changes”, or “Always
Skip the Firmware Check”.
HTTP/HTTPS User
Name
Enters user name to authenticate with HTTP/HTTPS server.
HTTP/HTTPS
Password
Enters password to authenticate with HTTP/HTTPS server.
Always send HTTP
Basic
Authentication
Information
Includes configured user name and password in HTTP request before receiving
authentication challenge from the server. Default is No.
Verify host when
using HTTPS
Verifies host name in server certificate when using HTTPS. Default is Yes.
Upgrade via
Selects firmware upgrade method: TFTP, HTTP or HTTPS.
Firmware Server
Path
Sets IP address or domain name of firmware server. The URL of the server that
hosts the firmware release. Default is fm.grandstream.com/gs.