User's Manual
Table Of Contents
- Users Manual DP760
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- CONFIGURATION GUIDE
- DP760 DECT REPEATER ASSOCIATION WITH DP750
- DP760 DECT REPEATER DISSOCIATION
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING THE DP760
- Users Manual DP760 FCC
P a g e | 27
DP760 User Manual
Verify host when
using HTTPS
Verifies host name in server certificate when using HTTPS. Default is Yes.
Provisioning via
Selects provisioning method: TFTP, HTTP or HTTPS
Config Server
Path
Sets IP address or domain name of configuration server. The server hosts a copy
of the configuration file to be installed on the DP760. Default is
fm.grandstream.com/gs.
Config File
Prefix
Checks if configuration files are with matching prefix before downloading them.
This field enables user to store different configuration files in one directory on the
provisioning server.
Config File
Postfix
Checks if configuration files are with matching postfix before downloading them.
This field enables user to store different configuration files in one directory on the
provisioning server.
Allow DHCP
Option 43 and
Option 66 to
Override Server
Obtains configuration and upgrade server’s information from DHCP server using
options 66 and 43.
Note: If DHCP Option 66 is enabled, the DP760 will attempt downloading the
firmware file from the server URL provided by DHCP, even though Config Server
Path is left blank.
Automatic
Provisioning
Specifies when provisioning process will be initiated; there are 4 options:
No: Repeater station will only request configuration files once at boot up.
Check every X minutes: User needs to specify a period in minutes.
Check every day: User needs to specify “Hour of the day (0-23)”.
Check every week: User needs to specify “Hour of the day (0-23)” and “Day
of the week (0-6)”.
Note: Day of week is starting from Sunday.
Default is No.
Authenticate
Conf File
Authenticates configuration file before being accepted. This protects the device
configuration from unauthorized modifications. Default is No.
Upload Device
Config
Uploads manually device configuration to repeater station; files both in TXT and
XML format are supported.
Device Config
(TXT)
Downloads actual device configuration file in .txt format.
Device Config
(XML)
Downloads default device configuration file in .xml format.