User's Manual

P a g e | 28
DP760 User Manual
Web/SSH Access
User Password
Configures user level password. Case sensitive and max length is 30 characters.
Confirm Password
Configures the new user password again to confirm.
Admin Password
Configures admin level password. Case sensitive and max. length is 30
characters.
Confirm Password
Configures the new admin password again to confirm.
Access Control
Lists
White list for
WAN side
If white list exists, then only these IP addresses are allowed to
web and SSH access.
Black list for
WAN side
If black list exists and white list is empty, then only these IP
addresses are not allowed to web and SSH access.
Web/SSH Settings
HTTP Web Port
Customizes HTTP port used to access repeater station web UI. Default is 80.
HTTPS Web Port
Customizes HTTPS port used to access repeater station web UI. Default is 443.
Web Access Mode
Determines the protocol to be used for the web interface access. Default is HTTP.
Disable SSH
Disables SSH access. Default is No.
SSH Port
Customizes SSH access port. Default is 22.
Date and Time
NTP Server
Defines URL or IP address of the NTP (Network Time Protocol) server. Used by
the repeater to synchronize the date and time. A list of public NTP servers can be
found at http://www.ntp.org .
NTP Update
Interval
Contacts NTP server at specified period of time (in minutes) to obtain the date
and time. Default is 60 minutes.
Allow DHCP Option
42 to NTP Server
Obtains NTP server address from a DHCP server using DHCP Option 42; it will
override configured NTP Server. If set to “No”, the repeater will use configured NTP
server to synchronize time and date even if a NTP server is provided by DHCP
server. Default is Yes.
Time Zone
Selects time zone to define date/time on the repeater station.
Self-Defined Time
Zone
Allows users to define their own time zone.