User's Manual Part 1

Firmware Version 1.0.1.x
GVC2500 User Guide
Page 37 of 88
Layer 3 QoS for
SIP
This field defines the layer 3 QoS parameter for SIP packets. It is the value used for
IP Precedence, Diff-Serv or MPLS. The Default value is 48.
Layer 3 QoS for
Audio
This field defines the layer 3 QoS parameter for audio packets. It is the value used
for IP Precedence, Diff-Serv or MPLS. The Default value is 48.
Layer 3 QoS for
Video
This field defines the layer 3 QoS parameter for video packets. It is the value used
for IP Precedence, Diff-Serv or MPLS. The Default value is 48;
802.1X MODE
Access GAC2500 home screen, go to Applications ->Settings ->Network->802.1X Mode. By default
802.1X is disabled. Selecting 802.1X mode to "EAP-MD5", "EAP-TLS5" or "EAP-PEAP" to turn on 802.1X.
Once enabled, the user will be required to enter the identity and Password to be authenticated in the
network.
Table 9 GAC2500 802.1X Mode Parameters
Parameters
Descriptions
802.1x Mode
Allows the user to enable/disable 802.1X and configure 802.1X mode. The default
setting is disabled.
Identity
Enter the Identity information for the 802.1X mode.
MD5 Password
Enter the MD5 Password for the 802.1X mode.
CA Certificate
Upload the CA certificate for the 802.1X mode.
Client Certificate
Upload the CA certificate for the 802.1X mode.
Private Key
Upload the private key for the 802.1X mode.