User's Manual Part 1

Firmware Version 1.0.1.x
GVC2500 User Guide
Page 38 of 88
MAKING PHONE CALLS
ACCOUNT
Users could make single line calls on GAC2500, you can switch lines, or hold, mute and transfer your call,
etc. GAC2500 home screen is the dial screen or you can tap on on desktop to access dial screen.
The following figure shows the account is successfully registered (account icon is highlighted in green).
Figure 26 GAC2500 Registered Account Status
MAKING A CALL
DIRECT DIALING
1. Enter the call screen;
2. Enter the necessary digits on the keypad;
3. Tap on to dial out.
---------------------------------------------------------------------------------------------------------------------
Note:
1. GAC2500 allows users to configure the "#" key as the "Send" key. If users need to cancel this setting,
please log in the built-in Web page to set the parameter "use # as the dial key" to "No".
2. Enter digits in the dial-up box. If the digits or the letters for the digit matches contacts and call history,
a dropdown list of numbers will be displayed. For example, entering 5 (JKL), 6 (MNO), 4 (GHI) and 6
(MNO) will display 5646 or john if contact "john" exists. Users can then select it to dial out.
---------------------------------------------------------------------------------------------------------------------
REDIAL
Redial is to dial the last dialed-out number. It is only available when the call log exists.