User's Manual Part 1

Firmware Version 1.0.1.x
GVC2500 User Guide
Page 40 of 88
4. Press to dial out.
PAGING/INTERCOM
Before placing paging/intercom, please make sure the callee has paging/intercom enabled so it can
automatically answer the paging/intercom call. To make paging/intercom call:
1. Access the dial screen on GAC2500.
2. Set the mode to "Paging".
3. Enter the number to dial.
4. Press to dial out.
ANSWERING A CALL
When the device is in idle and there is an incoming call, the device will show the call screen as below.
Figure 27 GAC2500 Single Incoming Call Screen
Select "Answer" to answer the call, or refuse the call by pressing the button "End" to reject the call.
When there is an incoming call during an active call, users will hear a call waiting tone with the LCD
displaying the caller name and ID for the incoming call.