User's Manual Part 2

Firmware Version 1.0.1.x
GVC2500 User Guide
Page 72 of 88
(|(telephoneNumber=%)(Mobile=%) return all “telephoneNumber” or
contacts with specified filter value in “Mobile” f.
(&(telephoneNumber=%) (cn=*)) return all contacts with specified
filter value with “cn“ field in “telephoneNumber”.
LDAP Number Filter
Set up the filter when configure number inquiry.i.e.,
(|(telephoneNumber=%)(Mobile=%) return all “telephoneNumber” or
contacts with specified filter value in “Mobile”.
(&(telephoneNumber=%) (cn=*)) return all contacts with specified
filter value and the set “cn“ field in “telephoneNumber”.
LDAP Mail Filter
Set up the filter when configure mail inquiry.i.e.,
(|(mail=%)(mailBox=%)) return all contacts with specified filter value
in “Mail” or“Mailbox” .
(!(mail=%)) return all contacts without specified filter value in “Mail” ;
(&(mail=%) (cn=*)) return all contacts with specified filter value and
the set “cn“field in “mail”.
LDAP Displaying Name
Attributes
Display onscreen name attribute, up to three attributes. Such
as:%cn %sn %telephoneNumber
Max Hits
Set up the max hit return to the LDAP server. If set to “0”, the server
will return all searched results. The default setting is 50.
Search Timeout(ms)
Set up the search timeout return after inputting search info.The
default setting is “0”.
LDAP Lookup For Dial
Set up whether to appy LDAP lookup for dial. The default setting is
“No”.
LDAP Lookup For
Incoming Call
Set up whether to appy LDAP lookup for incoming call. The default
setting is “No”.
Once configured, you can tap on Search button to input digits or name to search LDAP contact as
shown below.
Figure 64 GAC2500 Web GUI Maintenance-LDAP Book
: dial out.
:Add the LDAP contact to local Contacts.
Follow the steps below to batch add LDAP contacts:
1. Search LDAP contacts;
2. Tap on to access add contact screen as shown below: