- Grandstream SIP Enterprise Phone User's Manual GXP 2000

COMPLETING AND ANSWERING PHONE CALLS
Handset, Speakerphone and Headset Mode
Handset can be toggled between Speaker or Headset. To switch between Handset and
Speaker/Headset, press the Hook Flash in the handset cradle or press the SPEAKER button.
Multiple SIP Accounts and Lines
The GXP-2000 can support up to 4 independent SIP accounts. Each account is capable of independent
SIP server, user and NAT settings. Each of the 4 line buttons (LINE1-LINE4) is “virtually” mapped to an
individual SIP account. In off-hook state, select an idle line and the name of the account (as configured in
the web interface) is displayed on the LCD and a dial tone is heard.
For example: Configure the 4 SIP accounts as “FreeWorldDialup”, “BroadVoice” , “FreeWorldDialup” and
“Asterisk PBX” respectively and ensure each is active and registered. When LINE1 is pressed, you will
hear a dial tone and see “FreeWorldDialup” on the LCD display; when LINE2 is pressed, you will hear a
dial tone and see “BroadVoice” on the LCD display; when LINE3 is pressed, you will hear a dial tone and
see “Asterisk PBX” on the LCD display.
To make a call, select the line you wish to use. The LED will light up solid red. Switch lines before dialing
y pressing the same LINE button one or more times. If you continue to press one LINE, the selected
ccount will circulate among the registered accounts.
For example: when LINE1 is pressed, the LCD displays “FreeWorldDialup”; If LINE1 is pressed twice, the
LCD displays “BroadVoice” and th made through SIP account 2 - BroadVoice.
Inc a specific accou e. When
the “virtually” mapped line is in use, the GXP-2000 will flash the next available LINE (from left to right) in
red.
A line is ACTIVE when it is in use
Completing Calls
There are four ways to complete
:
Take Handset/SPEAKER/Headset off-hook or press an available LINE key (activates
hone). The line e and the primary line (LINE1) LED is red. If you
ct another LINE key (altern nt). Enter the phone number and press the
SEND key.
2. R
EDIAL: Take Handset/SPEAKER/Headset off-hook or press an available LINE key (activates
eakerphone), the corre the last
r called.
SE THE MENU: Press the History and then
eceived Calls/Missed Cal ct and
OK again to dial. T urrently applies only to primary
SIP account (LINE 1)).
4. P
AGING/INTERCOM: This is only valid if the SERVER/PBX supports this feature and both the
e and PBX (e.g. As et
-hook, select the LINE
PAGE USING. Dial the p mber you want to Page/Intercom and press SEND key.
NO tone and dialed num
selected. The phone waits 4 seco y entry timeout) before sending and initiating the
call. Press the “SEND” button to override the 4 second delay.
b
a
e subsequent call will be
oming calls to nt will attempt to use its corresponding LINE if it is not in us
and the corresponding LED is solid red.
a call:
1. DIAL
speakerp
wish, sele
will have a dial ton
ative SIP accou
sp sponding LED will be red. Press the SEND button to
redial
numbe
3. U
R
OK button to bring up the Main Menu. Select Call
ls/Dialed Calls and select phone number. Press OK to sele
press he call will dial out in speaker-mode
. (C
phon
off
terisk) are correctly configured. Take the Handset/SPEAKER/Heads
key associated with account, press OK key to display LCD: LINEx:
hone nu
TE: Dial-
ber display occurs after the handset is off-hook and the line key is
nds (by default; no ke
Grandstream Networks, Inc. GXP-2000 Users Manual Page 12 of 33
Firmware 1.1.1.14 Last Updated: 12/2006