GXW410x Analog FXO Gateway Quick Installation Guide Part Number: 418-02008-10 Document Version Number: 1.0 Grandstream Networks, Inc., 1297 Beacon St., 2nd Flr, Brookline, MA 02446 USA Tel: (617) 566-9300, FAX: (617) 249-1987 www.grandstream.
Grandstream Analog IP Gateway GXW410x Quick Installation Guide Please DO NOT power cycle the GXW410x during system boot up or firmware upgrade. WARNING: You may corrupt firmware images and cause the unit to malfunction. WARNING: Use only the power adapter included in the GXW410x package. Using an alternative nonqualified power adapter may possibly damage the unit.
Anywhere in the world IPPBX or SIP Server FXO Lines PSTN Cloud 4 or 8 Ports IP/L AN IP/WAN GXW-410x Grandstream IP Phones PSTN Analog Lines Connect the GXW410x Please use the equipment included in the packaging. Using any other power source may damage the product. 1. Connect one or more PSTN (PBX) telephone lines to FXO ports. 2. Insert the Ethernet cable into the WAN port and connect the other end of the Ethernet cable to an uplink port (a router or a modem, etc.). 3.
METHOD 2 Configure GXW410x to function as a PEER gateway (No SIP accounts needed; only used for one-stage dialing) METHOD 1 (Configuration): Please follow the steps below: 1. Enter a SIP Server IP Address (or FQDN ex. sip.mysipserver.com) in the SIP Server field under Profile 1 page. 2. Go to the Channels page and enter up to 8 accounts/extensions along with their Authentication ID and Authentication Passwords, and select the corresponding Profile.
Note: Generally for two-stage dialing the “Wait for Dial Tone” field under FXO Lines page should be set to N (No) Ex. Wait for Dial Tone: ch1-8:N; 7. For One Stage Dialing, before you configure the GXW-410x you need to make sure the SIP Server is configured to forward certain calls (ex. external calls dialed with a prefix, etc) to the GXW-410x. 8. On the GXW410x, you need to change the Stage Method field to 1. ex. Ch1-8:1; 9. Based on the prefix you have configured on the SIP Server (ex.
Bellcore, ETSI_RING, ETSI_TAS, DTMF and NTT B. DTMF Methods Note: The DTMF Method field under Channels page applies ONLY to PSTN to VOIP calls, not VOIP to PSTN. The gateway allows several combinations of sending DTMF across from PSTN to the IP end. Setting 1 2 3 4 5 6 7 DTMF Method In-audio RTP (RFC2833) In-audio + RTP (RFC2833) SIP INFO In-audio + SIP INFO RTP (RFC2833) + SIP INFO In-audio + RTP (RFC2833) + SIP INFO Ex. To set DTMF Method as in-audio: DTMF Method (1-7): ch1-8:1 C.
5. Take out the pin. All configuration settings are restored to factory settings. Grandstream Networks, Inc. www.grandstream.com info@grandstream.com Corporate Headquarters 1297 Beacon Street Brookline, MA 02446 Tel: +1 (617) 566 – 9300 Fax: +1 (617) 247 – 1987 About Grandstream Networks Grandstream Networks, Inc. is an award-winning designer and manufacturer of next generation IP voice & video products for broadband networks.
Konformitätserklärung gemäß dem Gesetz über Funkanlagen und Telekommunikationsendeinrichtungen (FTEG) und der Richtlinie 1999/5/EG (R&TTE) Declaration of Conformity in accordance with the Radio and Telecommunications Terminal Equipment Act (FTEG) and Directive 1999/5/EC (R&TTE Directive) Hersteller /Verantwortliche Person / The manufacturer / responsible person Manufacturer: Grandstream Networks, Inc.
Standards/Spezifikationen) ... Other means of proving conformity with the essential requirements (standards/specifications used)... Schutzanforderungen in Bezug auf die elektromagn. Verträglichkeit § 3 (1) 2, Artikel 3 (1b)) Protection requirements concerning electromagnetic compatibility § 3(1)(2), (Article3(1)(b)) angewendete harmonisierte Normen Harmonised standards applied...