BroadSoft Partner Configuration Guide Grandstream HT286/386/486/488/496 Analog Telephone Adapter & BT100 SIP Phone October 2007 Document Version 1.
BroadWorks® Guide Copyright Notice Copyright © 2007 Grandstream Networks, Inc. All rights reserved. Any technical documentation that is made available by Grandstream Networks, Inc. is proprietary and confidential and is considered the copyrighted work of Grandstream Networks, Inc. Trademarks BroadWorks® and BroadWorks Assistant™ are trademarks of BroadSoft, Inc. Microsoft, MSN, Windows, and the Windows logo are registered trademarks of Microsoft Corporation.
Document Revision History Version Reason for Change 1.1 Introduced document for HT496 version 1.0.3.96 validation with BroadWorks R14.SP2 1.2 Added HT286/386/486/488/BT-100 models. BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM HT286/386/486/488/496/BT100 © 2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
Table of Contents 1 Overview..........................................................................................................................................5 2 BroadWorks Validation Package Support Level .......................................................................6 3 Device Capabilities and Known Interoperability Issues...........................................................7 3.1 3.2 Capabilities...................................................................................
1 Overview This document describes the configuration procedures required for a Grandstream HT286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 to make full use of the capabilities of BroadWorks. The HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 is one of the many access devices that interoperate with BroadWorks. The HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 uses the Session Initiation Protocol (SIP) to communicate with BroadWorks for call control.
2 BroadWorks Validation Package Support Level Devices are validated according to BroadWorks Validation Packages. Each package validates a subset of features or items. This section describes the device’s support level for a BroadWorks Validation Package as well as the features or items in the package that are not supported. For specific issues, see section 3.2 Interoperability Issues. For a complete list of items validated per package, see Appendix B: BroadWorks Validation Package Test Items.
3 Device Capabilities and Known Interoperability Issues This section describes the features supported by the HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100, as well as BroadWorks interoperability issues and impact. The following table describes capabilities. Verified Revisions shows the results of partner (vendor) testing of a specific BroadWorks version with a specific partner’s device under test (DUT) version.
1.0.3.96 Grandstream BT-100: any maintenance version of 1.1.0.
3.2 Interoperability Issues This section lists the known interoperability issues between BroadWorks and partner release(s). For more information on issues related to the particular software release, see the partner release notes. None. BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM HT286/386/486/488/496/BT100 © 2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
4 BroadWorks Device Identity/Profile BroadWorks configurable device identify/profile is introduced in BroadWorks Release 14.0. This section applies only to BroadWorks Release 14.0 and later. The following table identifies the required BroadWorks device identity/profile settings for interoperability between the HT496 and BroadWorks. For an explanation of the profile parameters, refer to the BroadWorks Device Inventory Guide [4].
Device File Format %BWMACADDRESS%.txt BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM HT286/386/486/488/496/BT100 © 2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
5 BroadWorks Device Type This section applies to BroadWorks Release 13.0 and before. The following BroadWorks device type should be used for Grandstream HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100. Grandstream HT-286 Grandstream HT-386 Grandstream HT-486 Grandstream HT-488 Grandstream HT-496 Grandstream BT-100 The above device types require BroadWorks Release 13 MP.
6 Configuration Grandstream HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 can be configured via Web GUI Interface as well as via Configuration File through TFTP or HTTP. The HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 accepts configuration files in a proprietary binary format which is produced by the Grandstream configuration tool. The configuration tool creates a device configuration file based on a configuration template and the device’s MAC address.
6.1 System Level Configuration This section describes system-wide configuration items that are generally required for each HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 to work with BroadWorks. Subscriber-specific settings are described in the next section. {THIS IS JUST AN EXAMPLE AND IS NOT INTENDED AS A COMPLETE OR SUFFICIENT TABLE OF PARAMETERS. EACH DEVICE WILL VARY AND MAY BE COMPLETELY DIFFERENT.
6.2 Subscriber Level Configuration Parameters This section identifies the device-specific parameters, including registration and authentication. These settings must be unique across devices in order to be matched with the settings for a BroadWorks subscriber. Provisioning a subscriber to register with BroadWorks allows calls to terminate to the subscriber’s line.
7 Enhanced IP Phone Configuration Enhanced IP Phone Configuration is a BroadWorks feature that enables automatic generation of device configuration files, given administrator-supplied templates. For more information on the Enhanced IP Phone Configuration feature, see the Enhanced IP Phone Configuration Guide [3]. The HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 uses only a phone-specific file to configure the device.
Appendix A: Sample HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 Configuration Files NOTE: The following samples are examples and should be used as a reference only. DO NOT CUT AND PASTE THESE EXAMPLES TO GENERATE YOUR CONFIGURATION FILES. Use the configuration files obtained from Grandstream with the specific release to generate your configuration files. System Default Parameters: NOTE: This is an example file and should be used for reference only.
# Outbound Proxy P748 = sbc.broadworks.net # Use DNS SRV. 0 - no, 1 - yes. P702 = 1 # SIP Registration. 0 - no, 1 – yes P731 = 1 # Register Expiration (in minutes. default 1 hour, max 45 days) P732 = 60 # Send # 11 # 10 P773 = DTMF. 8 - in audio, 1 - via RTP, 2 - via SIP INFO In Audio & RTP & SIP INFO, 9 - In Audio & RTP IN Audio & SIP INFO, 3 - RTP & SIP INFO 1 # Enable Call Features. 0 - no, 1 – yes P751 = 0 # Special Feature.
# Authenticate Password P734 = # Display Name P703 = Group Template File: ATA-GroupTemplate.txt /BT100- GroupTemplate.txt NOTE: This is an example file and should be used for reference only.
P748 = sbc.broadworks.net # Use DNS SRV. 0 - no, 1 - yes. P702 = 1 # SIP Registration. 0 - no, 1 – yes P731 = 1 # Register Expiration (in minutes. default 1 hour, max 45 days) P732 = 60 # Send # 11 # 10 P773 = DTMF. 8 - in audio, 1 - via RTP, 2 - via SIP INFO In Audio & RTP & SIP INFO, 9 - In Audio & RTP IN Audio & SIP INFO, 3 - RTP & SIP INFO 1 # Enable Call Features. 0 - no, 1 – yes P751 = 0 # Special Feature.
Appendix B: BroadWorks Validation Package Test Items The following table describes the items tested in each BroadWorks Validation Package.
BroadWorks Validation Package Items Supported DUT Services - FAX FAX Passthrough FAX T38 DUT Services – Busy Lamp Field Basic BLF Redundancy DNS Registration Failover Call Setup Failover Mid-Call Failover SBC/ALG Registration Call Origination Call Termination Shared Call Appearance Line Seize Line Lamp Management Line Hold/Retrieve Multiple Call Arrangement SCA Bridging Feature Key Synchronization Feature Key Synchronization Video Integrated Video Phone Video Services Video Add-On TCP Basic
References [1] Grandstream Networks, Inc. 2007. HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT100 User Manual. Download at: http://www.grandstream.com/user_manuals/ AND GUI Interfaces: http://www.grandstream.com/user_manuals/GUI/. [2] Grandstream Networks, Inc. 2007. Grandstream Configuration Tool and Templates. Available from http://www.grandstream.com/configurationtool.html. [3] BroadSoft, Inc. 2006. BroadWorks Enhanced IP Phone Configuration Guide, Release 14.0. Available from BroadSoft at www.