User Guide

GRP26XX Administration Guide
P a g e | 107
"New Password" in the Web GUI→Maintenance→Web Access page→Admin Password. For a detailed
parameter list, please refer to the corresponding configuration template.
When the GRP2612 / GRP2612P / GRP2612W / GRP2613 / GRP2614 boots up or reboots, it will issue a
request to download an XML file named "cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC address
of the phone, i.e., "cfg000b820102ab" and "cfg000b820102ab.xml". If the download of
"cfgxxxxxxxxxxxx.xml" file is not successful followed by a configuration file named "cfgxxxxxxxxxxxx", the
phone will issue a request to download a specific model configuration file “cfg<model>.xml”, where <model>
is the phone model, i.e., “cfggrp2613.xml” for the GRP2613, “cfgrp2614” for the GRP2614. If this file is not
available, the phone will issue a request to download the generic “cfg.xml” file. The configuration file name
should be in lower case letters.
Figure 11: Config File Download
Note: (Attempt to download Config File again)
When doing provision on the phone, if your first config file contains p-values listed below, phone will try to
download the potential second cfg.xml file and apply the second file without rebooting. Maximum 3 extra
attempts.
Those P-values are:
*212 -- Config upgrade via
*234 -- Config prefix
*235 -- Config postfix
*237 -- Config upgrade Server
*240 – Authenticate Config File
*1359 – XML Config File Password
*8463 – Validate Server Certificate
*8467 – Download and process ALL Available Config Files
*20713 – Always authenticate before challenge
*22011 – Bypass Proxy For
*22030 – Enable SSL host verification for provision