User Guide

GRP26XX Administration Guide
P a g e | 17
GRP2600 Phone Setup
The GRP2600 phones can be installed on the desktop using the phone stand or attached on the wall using
the slots for wall mounting.
Slot for the wall
mount spacers
and phone stand
Figure 2: Phone Stand and Mounting Slots on the GRP2600.
Using the Phone Stand
For installing the phone on the table with the phone stand, attach the phone stand to the bottom of the
phone where there is a slot for the phone stand. (Upper half, bottom part).
Using the Slots for Wall Mounting
1. Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab from the handset cradle (See figure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the handset while the
phone is mounted on the wall (See figure below).
Figure 3: Tab on the Handset Cradle