User Guide

GRP26XX Administration Guide
P a g e | 83
Enable User Web
Access
Administrator can disable or enable user web access. Default is Enabled.
HTTP Web Port
Configures the HTTP port under the HTTP web access mode.
HTTPS Web Port
Configures the HTTPS port under the HTTPS web access mode. Default
setting is “443”.
Disable SSH
Disables SSH access.
The default setting is “No”.
SSH Public Key
This option allows you to use authentication keys for SSH access. The public
key should be loaded to phone’s web UI while the private key should be
used in the SSH tool side.
Note: This will allow upcoming SSH access without password.
Web/Keypad/Restrict
mode Lockout
Duration
Specifies the time in minutes that the web or LCD login interface will be
locked out to user after five login failures. This lockout time is used for web
login, STAR keypad unlock, and LCD restrict mode admin login. Range is 0-
60 minutes.
Web Session Timeout
Configures timer to logout web session during idle. Default is 10 min. Range
is 2-60 min.
Web Access Attempt
Limit
Configures attempt limit before lockout. Default is 5. Range is 1-10.
Maintenance → Security Settings→ Trusted CA Certificates
Trusted CA Certificates
Allows to upload and delete the CA Certificate file to phone.
Note: Users can either upload the file directly from web or they can choose
to provision it from their cfg.xml file.
Maintenance→Security Settings→ Keypad Lock
Enable Keypad
Locking
If set to “Yes” the keypad can be locked either manually by pressing for 4
seconds * key or pressing a VPK/MPK which set to “keypad lock” mode,
also the keypad will be locked automatically after the configured timer.
Keypad Lock Type
If set to “Functional Keys” then only functional keys will be locked and users
still are allowed to dial configured emergency numbers.
Password to
Lock/Unlock
Set the password to Unlock the keypad.
Keypad Lock Timer
Configure the idle screen timer after which the keypad will be automatically
locked.
Emergency
Enter list of allowed emergency numbers when keypad is locked (separate
the numbers with “,”.
Maintenance → Packet Capture