Quick Installation Guide

ManualsBrandsGrandstream Networks ManualsElectronicsIP Phone

In all EU member states, operation of 5150

- 5350 MHz is restricted to indoor use only.

Grandstream Networks, Inc.

126 Brookline Ave, 3rd Floor

Boston, MA 02215 USA

Voice: (617) 566-9300

Fax: (617) 249-1987

www.grandstream.com

For Warranty and RMA information, please visit

www.grandstream.com

6LQFHWKLVGHYLFHKDVWKH+$&IXQFWLRQWKHHDUSLHFHLV

HDV\WRDEVRUEVPDOOPHWDOSOHDVHWDNHFDUHWRDYRLG

VFUDWFKLQJ

GRP2614

Quick Installation Guide

IP Phone

Summary of content (4 pages)

PAGE 1
Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215 USA Voice: (617) 566-9300 Fax: (617) 249-1987 www.grandstream.com In all EU member states, operation of 5150 - 5350 MHz is restricted to indoor use only. GRP2614 IP Phone For Warranty and RMA information, please visit www.grandstream.com 6LQFH WKLV GHYLFH KDV WKH +$& IXQFWLRQ WKH HDUSLHFH LV HDV\ WR DEVRUE VPDOO PHWDO SOHDVH WDNH FDUH WR DYRLG VFUDWFKLQJ Quick Installation Guide
PAGE 2
PRECAUTIONS: EN The GRP2614 is not pre-configured to support or carry emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is Your responsibility to purchase SIP-compliant Internet telephone service, properly configure the GRP2614 to use that service, and periodically test your configuration to confirm that it works as You expect.
PAGE 3
PHONE SETUP: Wall mount Slot for the wall mount spacers and phone stand CONNECTING THE PHONE: To setup the GRP2614, follow the steps below: 1. Connect the handset and main phone case with the phone cord. Kensington Lock Headset Port PC Port LAN Port Handset Port Phone Stand 2. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an electrical outlet. If PoE switch is used in step 3, this step could be skipped. 3.
PAGE 4
PHONE CONFIGURATION: Configure the GRP2614 using a Web Browser: FCC warning 1. Ensure your phone is powered up and connected to the Internet. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 2. Press and hold the “UP” button for 3 seconds to see the IP address. 3. Type the phone’s IP address in your PC browser. 4. Enter admin’s username and password to access the configuration menu.