User's Manual

GSC36XX Series User Manual
Version 1.0.1.3
P a g e | 17
Mounting GSC3615
Step 1: Use supplied drill template to drill holes at ceiling. Select appropriate anchors or screws based on
ceiling material.
Step 2:
Place the cable into the groove of camera mounting
base, mount the base at wall using provided
screws as shown in below diagram. Leave the
connectors of cable dangling outside the cover.
Step 3: Use the provided hex key to lose the fix
screw, rotate and adjust the camera to the
appropriate angle and position.
Step 4: Hold the body of camera and align to the
notch as shown in the diagram, then push the body
of camera into the cover of camera already
mounted at the ceiling.
Figure 4: Mounting GSC3615