User's Manual

ManualsBrandsGrandstream Networks ManualsCamera & PhotoFHD Infrared Weatherproof IP Box Camera

Table Of Contents

GSC36XX Series User Manual

Version 1.0.1.3

P a g e | 27

Table 7: Access Settings

Web Access Mode

Selects the access mode to the Web GUI either HTTP or HTTPS.

Web Access Port

Specifies the TCP port for Web Access, default 443.

MJPEG Authentication

Mode

Allows 3

party system integrator or developers to implement related

application for users. By default, this feature is disabled and use more

secured “Challenge+Response” mode.

If enabled, user can send HTTP API with correct credentials to retrieve

MJPEG video stream or JPEG snapshot from GSC.

Notes:

1- The MJPEG stream can be retrieved via the following URL

HTML based ➔

http(s)://admin:password@IP_GSC3610:Port/jpeg/mjpeg.html

Stream ➔ http(s)://admin:password@ip:port/jpeg/stream

2- The MJPEG stream retrieved via the methods above is running on

the background and cannot be tuned. If users want more flexibility,

they can use the three configurable video streams as shown on

[Retrieving Video Streams]

RTSP Port

Specifies RTSP port for media stream, default TCP port 554.

User Login Timeout(min)

If no action is made within this time the GSC36XX will logout from the

Web GUI, range is between 3 and 60. Default is 5.

Maximum Number of

Specifies the allowed login times error limit, if the unsuccessful login

attempts exceed this value, the GSC36XX webGUI will be locked for the

time specified in Login Error Lock Time. Default is 5.

Locking Time of Login

Error (m)

Specifies how long the GSC36XX is locked before a new login attempt is

allowed. Default is 5.

Disable Web Access

Allow or deny the web access to the GSC36XX. (HTTP API do not take

effect when this option is enabled).

Note: If both WebUI and SSH are disabled, GSC36XX will get blocked

and not be able to be accessed. Only two ways to get it back:

1. Re-provisioned by ITSP or Service Provider (by adjusting the related

parameters)

2. Hard Reset (GSC36XX has to be offline and uninstalled to perform

this hard reset).

Enable UPnP Discovery

UPnP (or mDNS) function for local discovery. Default setting is enabled.