User's Manual Part 1

Firmware Version 1.0.0.X
GVC3202 User Guide
Page
28
of
117
 Check in the checkbox or enable/disable an option
 Bring up the drop-down list when clicking on a combo box
 Switch input methods in the input box, tap on the corresponding buttons on the soft keyboard
to input characters

Double left click on the soft keyboard can switch to "Always use upper case" in English input
method.
 Single click the right key of the USB mouse to exit the current displayed menu. It will go back to the
previous menu without saving the configurations.
OLED SCREEN
Table 7: GVC3202 OLED Screen Status Descriptions
OLED Screen Status
Descriptions
Booting
Display "BOOTING..." when GVC3202 boots up.
IP
Display GVC3202 IP address. For example, IP: 192.168.40.5.
Call Status
Display "Ringing", "Calling", "Talking", "Call Waiting", "Missed
Call", "New Voicemail" and etc.
Upgrade Status

Display "New Version" when a new firmware version is
detected.

Display "Upgrading" in the process of upgrading.

Display failure reason when upgrade fails. For example,
"Incompatible Hardware", "Insufficient Space", "Same
Version", etc.
Sleep Mode
When the device is in sleep mode, the OLED shows "Standby".
Abnormal Status
It is used to display abnormal status information. The
hexadecimal error code will be displayed next to the abnormal
status.
USING THE LED INDICATOR
GVC3202 LED indicator is located next to the OLED. It can be used to notify the users with current status
of the device. Please refer to the status description below.