User's Manual Part 1

Firmware Version 1.0.0.X
GVC3202 User Guide
Page
35
of
117
Figure 12: GVC3202 Bluetooth - Paired Device
If the connection is lost between the Bluetooth device and GVC3202, go to LCD menu->Settings-
>Network->Bluetooth and click on the device name under “Paired devices” again to reconnect.
USING BLUETOOTH REMOTE CONTROL
Users could use GVC3202 Bluetooth remote control that comes with GVC3202 packaging to control and
configure GVC3202. When the GVC3202 boots up for the first time, a setup wizard will guide the users to
pair and connect the remote control to the GVC3202. When the remote control is connected to GVC3202,
users will see icon on the top status bar of GVC3202 LCD display device.
If the user happens to reset the GVC3202, or replace the remote control, the user will need pair and
connect remote control to the GVC3202 again. Please follow the steps below:
1. Connect a USB mouse or open the virtual remote control after logging in GVC3202 web UI.
2. On the LCD display device, go to Settings->Network->Bluetooth.
3. Select
and click
"Search for devices".
4. On the remote control you would like to pair with GVC3202, press "OK" and digit 5 keys at the same
time for about 5 seconds.
5. The pairing and connection process will be initiated and finished in a few seconds. Please do not