User's Manual Part 1

Firmware Version 1.0.0.X
GVC3202 User Guide
Page
43
of
117
Table 14: GVC3202 Camera Parameters
Parameters
Descriptions
Picture Mode
GVC3202 has 4 built-in modes as well as "Manual" for customization. When set to
"Manual", press "OK" key to access each setting to configure sharpness, contrast,
saturation, and brightness.

Sharpness: Higher sharpness brings higher screen clarity. The object
displayed on the screen has more sharpen edge.

Contrast: Higher value brings more distinct color contrast.
 Saturation: Higher value brings deeper color.
 Brightness: Higher value brings brighter color.
White Balance
This is used to display accurate images. Users could set to "Manual" or "Auto".

When set to "Auto", the device will adjust parameters automatically according
to the current environment.
 When set to "Manual", the device will disable "Auto" mode. Press "OK" key to
access manual setting screen, and adjust red or blue gain manually for better
white balance.
De-noise
Users could set to "off", "low", "medium" or "high". Higher reduction level brings
less image noises.
Frequency of A.C.
Users could set to 50HZ or 60HZ.
Red Shortcut Key
(MF+)
Manual focus: increase the focal length.
Yellow Shortcut Key
(MF-)
Manual focus: decrease the focal length.
Blue Shortcut Key
(AF)
Auto focus