User's Manual Part 2

Firmware Version 1.0.0.X
GVC3202 User Guide
Page
89
of
117
COPY FILE
To copy the file from GVC3202 to USB/SD storage device:
1. Insert USB/SD storage device into USB port on GVC3202. It will take a few seconds for GVC3202 to
prepare the connection.
2. The USB storage icon will show up on the status bar.
3. Go to Home screen->Applications->File Manager.
4. Open the target folder.
5. Press the yellow shortcut key and select the file.
6. Press the blue shortcut key to copy file and press to go back to the upper level directory.
7. Select target storage device and go to the directory where the file will be pasted to.
8. Press the yellow shortcut key to paste the file.
Users can also select file and press the blue shortcut key to copy one single file or folder.
SEND FILE
1. Go to Home screen->Applications->File Manager.
2. Open the target folder.
3. Press the yellow shortcut key and select the file.
4. Press MENU key on GVC3202 remote control and select "Send" option.
5. Select target location and press "OK" key on GVC3202 remote control to send file. If users need to
send the file via Bluetooth, enable and connect Bluetooth device first. Otherwise, the interface will be
redirected to the corresponding setting page to configure.
Users can also select file and press the MENU key to send one single file or folder.
DELETE FILE
1. Go to Home screen->Applications->File Manager.
2. Open the target folder.
3. Press the yellow shortcut key and select the file.
4. Press the red shortcut key.
5. A dialog will pop out for users to confirm whether to delete the file or not.
6. Press "OK" key to delete the file successfully.
Users can also select file and press the red shortcut key to delete one single file or folder.