User's Manual Part 2

Firmware Version 1.0.0.X
GVC3202 User Guide
Page
115
of
117
FACTORY RESET
Users could reset GVC3202 to factory settings via the following ways: Reset via local GUI, via Web page,
via the reset hole on the back panel of GVC3202. Factory reset will delete configuration info and syslog
info.
--------------------------------------------------------------------------------------------------------------------------------------------
Warning:
1. Factory reset will erase all GVC3202 configuration information. Please back up all settings or print
useful information before making the following operations. If users lose all parameters or records,
Grandstream will not take responsibility for the damage or loss.
2. After factory reset, the remote control will not be paired to GVC3202 anymore. Please go to
GVC3202 LCD settings->Network->Bluetooth, select the menu buttons on the upper right and click
"Search New Devices". GVC3202 remote control “GS-RCU” with last 4 digits of the remote control
MAC address will show in the available device list. Select it to start pairing process on GVC3202,
immediately followed by pressing OK+5 keys on the remote control at the same time. The remote
control will be paired and connected to GVC3202 again.
--------------------------------------------------------------------------------------------------------------------------------------------
RESET VIA LCD
Go to GVC3202 LCD idle screen->Settings->Maintenance->Factory Reset, click on the "Reset" button to
bring up the prompt box as shown below. Click "OK" to reboot the device and restore factory settings.
Figure 73: Factory Reset via LCD