User's Manual

GVR3550 USER MANUAL
Grandstream Networks, Inc. GVR3550 User Manual Page 29 of 76
Firmware Version 1.0.0.0 Last Updated: 10/2013
USE PTZ
Click the PTZ Control button to bring up the PTZ Control page, as shown in figure 18 below.
Figure 18: GVR3550 PTZ Control Page
Name
Specifications
PTZ Direction
Control and
Reset button
8 PTZ direction buttons are used to control the
corresponding eight directions of PTZ, the reset
button is used to restore PTZ direction to the
original position.
Adjust
Aperture+,
Focus+, Lens +
Zoom in the Aperture, Focus and Lens
respectively. Lens + is only available when the
channel is in full screen mode.
Adjust
Aperture-,
Focus-, Lens -
Zoom out the Aperture, Focus and Lens
respectively. Lens - is only available when the
channel is in full screen mode.
More:
Bring up more PTZ settings.
PZT Control
Selection
Bring up preset setting and operation panel below
the screen when PTZ is set to preset.
Bring up patrol setting and operation panel below
the screen when PTZ is set to patrol.
Bring up pattern setting and operation panel
below the screen when PTZ is set as contrail.
Exit PTZ
Control
Click to exit the PTZ Control panel directly.
Table 7: GVR3550 PTZ Control Specifications