User's Manual

GVR3550 USER MANUAL
Grandstream Networks, Inc. GVR3550 User Manual Page 36 of 76
Firmware Version 1.0.0.0 Last Updated: 10/2013
Figure 31: GVR3550 Locked Record Management
Click the button to set the current time as the start time to
clip record.
Click the button to set the current time as the start time to
clip record.
Click the button to bring up the Record Save Path Setting
page as shown in figure 34 below. Click on the “Save”
button to download record after setting the path.
Figure 32: GVR3550 Record Save Path Settings Page
NOTE:
 The configured default path would be invalid if the external storage device is changed, the
corresponding failure prompt would pop up if users click the ”Snapshot” or “Download” button.
Users could go to Main Menu->System Settings->Basic System Settings to set the default path to
save snapshots and download file.
 Please do not disconnect the USB device when downloading the clippings files or it may cause
record download failure or error.
MAIN MENU
Right click the mouse to enter the GVR3550 System Configuration page, see figure 33.
Figure 33: GVR3550 Main Menu Page
The configuration items are varied according to different user permissions. Administrator users can make
operations like Record Configuration, Channel Management, Alarm Configuration, Network Settings,
System Settings,Status and Maintenance.
RECORD CONFIGURATION
Record Settings include Record Mode Configuration, Record Plan Configuration and Record Policy
Configuration.