User's Manual

GVR3550 USER MANUAL
Grandstream Networks, Inc. GVR3550 User Manual Page 38 of 76
Firmware Version 1.0.0.0 Last Updated: 10/2013
2. Set record interval on the weekly basis: at least set one interval and users could set up to eight time intervals at
maximum. Intervals could be duplicated to other weeks. The copy page is shown in figure 37.
Figure 37: GVR3550 Add New Record Plan Page---Duplicate Time Interval
Users could edit, modify, delete and apply the plan in the list.
Click to display the record plan details as shown in figure 38.
Figure 38: GVR3550 Record Plan Display Page
Click the icon to bring up the record plan editing page as shown in figure 38.
Click the icon to bring up the applied channel setting page.Check one channel to apply the plan to this
channel.The added channel would be showed in the “Applied Channels”.
NOTE:
 One channel can only correspond to one schedule record
RECORD POLICY CONFIGURATION
Record policy endows users with more efficient usage of limited HDD resources. Users could set the proper
pre-record time so as to view the record a few seconds before alarm when there is an alarm event. Or users
can also set stop record or overwrite the previous record when the HDD capacity is insufficient.
Figure 39: GVR3550 Record Policy Configuration Page
 Pre-record Time:
Set up the pre-record time of the record .Valid time: 0 to 30 seconds.
 When HDD is
Full:
Set the policy when HDD is full: Users could select “Stop Record”, or “Overwrite
Previous” , which means the new record would override the earliest ones when
HDD is full.