User's Manual

GVR3550 USER MANUAL
Grandstream Networks, Inc. GVR3550 User Manual Page 39 of 76
Firmware Version 1.0.0.0 Last Updated: 10/2013
CHANNEL MANAGEMENT
Channel Management includes Channel Config, Encoding Config and IPC Event Config.
CHANNEL CONFIG
Users could search all available IPC within the same LAN via “Search Device” as shown in figure 40.
Figure 40: GVR3550 Channel Config Page
Check the IPC you want to add, click the “Add” button to add it to the channel list below.
If the camera can’t be searched automatically, users can also manually add the target camera to the channel
list. As shown in figure 41.
Figure 41: GVR3550 Manual Add Channel
 Channel :
Select the target channel to add, the added channel is unavailable for selection.
 Protocol:
Choose channel protocol. GVR3550 currently only supports IPC compatible with
ONVIF protocol and Grandstream GXV36xx series cameras.
 IP:
Set the IP Transmission protocol to TCP or UDP.
 IP Address:
Set the IP address of the remote IPC
 Port:
Set the port No. of the remote IPC
 Username:
Set the username connecting to the remote IPC
 Password:
Set the password connecting the remote IPC
NOTE:
 When adding the searched remote device, the username and password with which the GVR3550
trying to connect to the remote device are all default ones, If the username and password of the
remote device are not accord with the default ones of GVR3550, connection may fail. Please
manually modify the username and password of the remote device. The default username and