User's Manual

GVR3550 USER MANUAL
Grandstream Networks, Inc. GVR3550 User Manual Page 44 of 76
Firmware Version 1.0.0.0 Last Updated: 10/2013
Alarm:
 HDD Empty
Alarm:
Alarm when detecting no HDD access
 HDD Full Alarm:
Alarm when detecting full HDD
 HDD Error
Alarm:
Alarm when detecting unusable HDD with error
 IP Conflict
Alarm:
Alarm when detecting the IP address in the network conflict with the GVR3550.
The GVR3550 Abnormal Alarm Config includes Screen Prompt, Buzzer, HDMI Alarm, Send Email, Alarm
Output .Alarm Action Parameters settings procedures are the same as chapter “IPC Event Config”.
NETWORK SETTINGS
Network Management includes Basic Settings, Advanced Settings and Server Settings. Users could easily
imply network connection and ensure the security in network via Network Settings.
BASIC SETTINGS
Basic Settings page is shown in figure 48 below, users can choose to obtain IPv4 address automatically ,
manually set static IP address or use PPPoE. The GVR3550 is available only when network setup is correct.
Figure 48: GVR3550 Network Settings---Basic Setting
 DHCP:
Check to obtain IPV4 address from DHCP server automatically
 Static IP:
Check to set static network parameters
 IP Address:
Input IPV4 address manually
 Subnet Mask:
Input IPV4 subnet mask manually
 Gateway:
Input IPV4 gateway manually
 Preferred DNS
Server:
Input Preferred DNS server manually