User's Manual

GVR3550 USER MANUAL
Grandstream Networks, Inc. GVR3550 User Manual Page 56 of 76
Firmware Version 1.0.0.0 Last Updated: 10/2013
Figure 68: GVR3550 HDD Bad Sector Detection Page
 HDD No.:
The HDD No.1-4 will be allocated in sequence after HDD mount and the HDD
No.will not be changed in the subsequence use.
 Start:
Click the button to initiate Bad Sector Detection.
 HDD Capacity
Display the total HDD capacity
 Block Capacity:
Display the HDD block capacity
 Status:
Display Bad Sector Detection status: Testing, Test Paused, Not Tested.
 Error Count:
Display the number of HDD errors
 Pause/Continue:
Pause/Continue Bad Sector Detection
 Stop:
Stop Bad Sector Detection
 Error Info:
Click the button to check the HDD error info details
 HDD Status
Display:
Tag HDD status with various colors:Good, Damaged, Shield.
SYSTEM LOG
Users could consult the running state of GVR3550 via System logs. See figure 69 below.
Figure 69: GVR3550 System Log Page
 Start Time:
System log search start time
 End Time:
System log search end time
 Log Type:
System logs including: All Types, System Operation, Configuration Operation,
Data Management,Alarm Event, Record Operation, User Management, Clear Log,
File Operation.
 Search:
Click this button to start searching the eligible log and display it in the log list.
 Export Log:
The GVR3550 supports exporting the searched log to an external storage device,
 Browse:
Click this button to select the destination address to save the exported log,
 Export:
Click this button to save the exported log file to the selected destination path.
 Clear:
Click this button to clear the log information.
 Play:
When the log type is alarm event, the play button is in blue, click this button to
enter the Playback page to replay the record.
 Details:
Click this button to view detailed information of one log.