User's Manual

GVR3550 USER MANUAL
Grandstream Networks, Inc. GVR3550 User Manual Page 63 of 76
Firmware Version 1.0.0.0 Last Updated: 10/2013
 Volume
On/Off:
If the remote camera is installed with audio input device once the
volume is on, users could listen in to the user whose voice is conveyed
from the remote camera.
 Intercom
On/Off:
If the remote camera is installed with audio input device once the
intercom is on, users could speak to the user from the remote camera
via the local audio input device.
 PTZ
Control:
Click to enable PTZ Control to make basic operations like PTZ preset,
patrol, pattern, contrail.
 Switch to
full
Screen:
Switch the current screen to full screen or double click to enter full
screen mode. Double click again to exit full screen.
 Instant
Playback:
Playback the record in the preset time of the channel. It will prompt
“The selected channel has no record” if there is no record detected.
Users could set the preset time on the Basic System Settings page
 Image
Configurat
ion:
Enter Image Configuration page to adjust the current window image.
The info of each channel would be displayed on the upper left corner of the channel screen on the preview
page as shown in figure 82 below.
Figure 82: GVR3550 Web Page---Channel Preview
Name
Specifications
Channel
Name
Display the channel name , it would not be displayed if not
configured.
Date&Time
Display the current time , it would not be displayed if not
configured.
Channel IP
Address
Display the IP address of IPC.
Channel
Stream
Click right mouse to enter the stream setting page to view
channel stream or tick to choose primary stream or
secondary stream.
Record
Status
Display the record status of the channel(being recorded or
not).