User's Manual

GVR3550/GVR3552 User Manual Page 116 of 125
1. Open Apache server. Go to Start ->All Programs ->Apache HTTP Server 2.2 -> Monitor Apache
Servers on a PC which has installed Apache server. The icon in the notification area of taskbar
indicates Apache server is already enabled. If displays , select "Start" to open server;
2. Put the prepared file to the following path:
Installation Path \ Apache Software Foundation \ Apache2.2 \ htdocs.
NOTE:
Ø If put the file under the folder "htdocs", the URL format to access the Apache
server is: http:// The IP address of PC that installed the Apache server .e.g.:
http://192.169.1.51
Ø If put thefile under the subfolder of the folder "htdocs", the URL format to access
the Apache server is: http:// The IP address of the PC that installed the Apache
server/subfolder Name. e.g.: http://192.169.1.51/filename
UPGRADE FIRMWARE WITH HTTP SERVER
1. Unzip the firmware file and put it under "htdocs" directory of TFTP server;
2. Open TFTP server and go to Settings->Advanced Settings to select HTTP;
3. Set the firmware server path to the IP address of HTTP server ;
4. Click "Upgrade Now" and GVR will prompt users whether to reboot when complete upgrade. With no
operations in 30 seconds the GVR will reboot automatically.