User's Manual

GVR3550/GVR3552 User Manual Page 38 of 125
Figure 15 Live Preiew Page–Right Click Menu
LOCAL PREVIEW
GVR3550/GVR3552 would directly enter live preview screen once booted up, users could preview the live
preview screen without login but unable to make any operations. Only after logged in users could make basic
preview operations and other setups.
PREVIEW STATUS
Preview camera status: The camera has not been added, camera preview, connecting the camera, camera
connection failed.
Table 11 Preview Page–Camera Status Explanation
Icon Name Explanation
Add camera
If there is no existing camera, click this button to quick enter the
camera settings page to add camera.
--
Camera preview
Display camera preview page.
Camera
connection
Failed
Failed to connect camera.
Stop preview
when recording
Failed
The insufficient performance of GVR may cause preview failure. Tap
on the icon to preview the closed page.
On the preview page, the recording and alarm status of each camera could be distinguished by the tag on the top
right corner of each camera.
Table 12 Preview Status Explanation
Icon Name Explanation
Motion Detection
Alarm
Alarm when detecting dynamic motion in detection area.
I/O Alarm
(camera)
Alarm when the remote camera is connected to IO alarm device.
Signal Loss
Alarm when no signal detected.
Recording
The monitoring camera is in recording mode.
A dialog box will pop up in the center page to prompt the users if there is an abnormal alarm or local I/O