User's Manual

GVR3550/GVR3552 User Manual Page 39 of 125
alarm (go to Settings page to set first), as shown in figure 16.
Figure 16 Abnormal Alarm Prompt
Alarm prompt can be minimized to the lower right corner of the page; you can click to view the alarm
details. If there always been alarm triggers, the prompt will pop up in the center of the page every 5 minutes.
Table 13 Abnormal Alarm Explanation
Icon Name Explanation
Disconnection
Alarm
Alarm when the network is disconnected.
HDD Empty
Alarm
Alarm when no HDD detected.
HDD Error Alarm
Alarm when HDD is abnormal.
HDD Full Alarm
Alarm when HDD is full.
IP Conflict Alarm
Alarm when detecting the IP address of another device is in conflict
with the GVR in the network.
Local I/O Alarm
Alarm when detecting I/O alarm on GVR3550.
BASIC PREVIEW OPERATION
If need to make basic operations to one specified camera, users could access the preview page and click left
mouse to bring up the menu bar as shown in Figure 17. Click the buttons on the menu bar to make
corresponding operations.
Figure 17 Basic Preview Operations
Table 14 Basic Preview Operations Explanation
Icon Name Explanation
Close
Recording
The camera is not recording now.
Auto
Recording
The camera is in schedule record mode.