User's Manual

GVR3550/GVR3552 User Manual Page 45 of 125
PATTERN
When set PTZ to pattern, users could edit and use pattern on the control panel. The factory default setting is 3
empty patterns. See figure 22.
Figure 22 PTZ Control Page—Pattern
1. Set PTZ control to pattern;
2. Select the pattern name;
3. Click the "Start Record" button to adjust the pattern of remote camera via PTZ navigation panel;
4. Click the "Save Record" button save the pattern;
5. Click on before the pattern, when the button turns to a triangle , the PTZ will rotate according to
the pattern. Click again to stop.