User's Manual

GVR3550/GVR3552 User Manual Page 57 of 125
Figure 37 Manual Add Camera Page—Add DVS
Table 19 Camera Parameters Setting Explanation
Parameter Explanation
Camera
Select camera. You cannot select the existing camera.
Protocol
Supports Grandstream series cameras and cameras compatible with ONVIF
protocol.
Protocol (IP)
Set the protocol to TCP or UDP.
IP Address
Set the IP address of the remote IP camera.
Port
Set the port number of the remote IP camera. The default is "80".
Username
Set the username to connect the remote IP camera. The default is "admin".
Password
Set the password to connect the remote IP camera. The default is "admin".
NOTE:
Ø When trying to connect to the remote IP camera, the username and password
the GVR3550/GVR3552 use are both default, if not, the connection may fail.
Please manual modify the remote IP camera username and password.
Table 20 DVS Parameters Setting Explanation
Parameter Explanation
IP Address
Set the IP address of the DVS device.
Username
Set the username to connect the DVS device. The default is "admin".
Password
Set the password to connect the DVS device. The default is "admin".
Analog Interface
Count
Configures DVS analog interface count. You could see the list of interfaces if there
exist more than one interface.
RECORD MODE CONFIG
Record Mode Configuration page is as shown in figure 36, users could click one camera to set Close Record,
All Day Record and Schedule Record.