User's Manual

GVR3550/GVR3552 User Manual Page 59 of 125
CAMERA EVENT SETTINGS
Camera event settings page is as shown in figure 40, Users could set different alarm types to each camera.
Figure 40 Camera Event Settings Page
Table 22 Camera Events Settings parameters Explanation
Parameter Explanation
Camera
Select camera.
Event Type
Motion Detection, Signal Loss, IPC External Alarm.
Alarm Enable
Check to enable/unable alarm.
Alarm Schedule
Select schedule in the drop-down list. Tap on to add a schedule.
Region Config
Set detection area to IPC with motion detection function. Users could set up to 16
areas. Click left mouse to draw an area, then release the mouse to confirm. Click
on "X" in the upper right corner of the area to delete it, Double click or right click
mouse to save the area and exit.