User's Manual

GVR3550/GVR3552 User Manual Page 60 of 125
PTZ Linkage Config
Only available to camera with PTZ linkage function. For different camera and
event type, users could set various alarms: Screen Prompt, Beep, HDMI Alarm,
Send Mail, Alarm Output, Alarm Delay (s), or copy the alarm to other cameras.
Alarm Action
Set different alarm mode.
Table 23 Camera Alarm Parameters Explanation
Parameter Explanation
Screen Prompt
Display prompt on screen when alarm.
Beep
Beep when alarm.
HDMI Alarm
Alarm If the GVR is connected to an HDMI display device.
Send Email
Send email to one mailbox when alarm. Go to Settings ->System Settings ->
Email Settings to set.
Recording Camera
Select camera to record when alarm.
Record Delay (s)
When the alarm end, the alarm recording will last for a period of time before stops,
the range is 10~180 seconds.
Alarm Output
The alarm output interface when alarm.
Alarm Delay (s)
When the alarm end, the alarm output will last for a period of time before stops,
the range is 1~600 seconds.
Copy to Other Camera
Copy the alarm parameters of one camera to other cameras.
ENCODING CONFIG
Encoding Config page is as shown in figure 41.