User's Manual

GVR3550/GVR3552 User Manual Page 71 of 125
BASIC SETTINGS
Basic Settings page is shown in figure 52, users can choose to obtain IPv4 address automatically or manual
set static IP address or use PPPoE. GVR3550 is available only when network setup is correct.
Figure 52 Network Settings—Basic Settings Page
Table 27 Basic Network Parameters Explanation
Parameter Explanation
DHCP
Obtain IPV4 address from the DHCP server automatically.
Static IP
Set static network parameters.
IP Address
Manual enter the IPV4 address.
Subnet Mask
Manual enter the IPV4 subnet mask.
Gateway
Manual enter the IPV4 default gateway address.
MTU (Byte)
Enter MTU (Maximum Transmission Unit), the maximum data package that can be
transmitted on the network. If the GVR MTU is greater than the one of the gateway,
the lager one will be split for transmission. Please confirm the MTU value of your
gateway before set.