User's Manual

ManualsBrandsGrandstream Networks ManualsComputers & AccessoriesWireless Access Point

info@grandstream.com

www.grandstream.com

GWN7600

To ensure

easy installation and management, the GWN7600 uses a controller

-less distributed network management design in

which the controller is embedded within the product’s web user interface. This allows each access point to manage

a network of up to 30 GWN76xx series APs independently without needing separate controller hardware/software

and without a single point-of-failure. This wireless access point can be paired with any third party routers as well as

Grandstream GWN series routers. With support for advanced QoS, low-latency real-time applications, 450+ concurrent

client devices per AP and dual Gigabit network ports with PoE, the GWN7600 is an ideal WiFi access point for medium

wireless network deployments with medium-to-high user density.

1.17Gbps wireless

throughput and 2x

Gigabit wireline ports

Up to 165-meter

coverage range

Support 450+ concurrent

WiFi client devices

Support 802.3af

Power-over-Ethernet

(PoE)

Anti-hacking secure boot and

critical data/control lockdown

via digital signatures, unique

security certicate/random

default password per device

Advanced QoS to ensure

real-time performance

of low-latency applications

Embedded controller allows

GWN7600 to auto-discover,

auto-provision and manage

up to 30 GWN7600s in a

network

Wireless Access Point

Summary of content (8 pages)

PAGE 1
GWN7600 Wireless Access Point To ensure easy installation and management, the GWN7600 uses a controller-less distributed network management design in which the controller is embedded within the product’s web user interface. This allows each access point to manage a network of up to 30 GWN76xx series APs independently without needing separate controller hardware/software and without a single point-of-failure.
PAGE 2
Specifications WiFi Standards Antennas WiFi Data Rates IEEE 802.11 a/b/g/n/ac (Wave-2) 2x 2.4 GHz, gain 3 dBi, internal antenna 2x 5 GHz, gain 3 dBi, internal antenna IEEE 802.11ac: 6.5 Mbps to 877 Mbps IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps IEEE 802.11n: 6.5 Mbps to 300 Mbps IEEE 802.11b: 1, 2, 5.5, 11 Mbps IEEE 802.
PAGE 3
EN OVERVIEW GWN7600 PORTS To ensure easy installation and management, the GWN7600 uses a controller-less distributed network management design in which the controller is embedded within the product’s web user interface. This allows each access point to manage a network of up to 30 GWN7600 series APs independently without needing separate controller hardware/software and without a single point-of-failure.
PAGE 4
HARDWARE INSTALLATION GWN7600 can be mounted on the wall or ceiling, Please refer to the following steps for the appropriate installation. Wall Mount 1. Position the mounting bracket at the desired location on the wall with the arrow pointing up. 2. Use a pencil to mark the four mounting holes (screw holes DIA 5.5mm, reticle hole DIA 25mm). 3. Insert screw anchors into the 5.5 mm holes. Attach the mounting bracket to the wall by inserting the screws into the anchors.
PAGE 5
4. Connect the power cable and the ethernet cable (RJ45) to the correct ports of your GWN7600. Ceiling Mount 1. Remove the ceiling tile. 2. Place the ceiling backing plate in the center of the ceiling tile and mark the mounting screw holes (screw holes DIA 5.5mm, reticle hole DIA 25mm). 5. Align the arrow on the GWN7600 with the arrow on the locking tab of the mounting bracket and ensure that your GWN7600 is frmly seated on the mounting bracket. 6.
PAGE 6
POWERING AND CONNECTING THE GWN7600 GWN7600 can be powered on using PoE switch using following steps: Step 1: Plug a RJ45 Ethernet cable into the network port of the GWN7600 Step 2: Plug the other end into the uplink port of the power over Ethernet (PoE) switch. Network Port 5.
PAGE 7
CONNECT TO GWN7600 DEFAULT WIFI NETWORK GWN7600 can be used as standalone access point out of box, or after factory reset with Wi-Fi enabled by default. After powering the GWN7600 and connecting it to the network, GWN7600 will broadcast a default SSID based on its MAC address GWN[MAC’s last 6 digits] and a random password. Note: GWN7600’s default SSID and password information are printed on the MAC tag of the unit. Method 2: Discover GWN7600 using GWN DiscoveryTool. 1.
PAGE 8
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.