User's Manual

5. Align the arrow on the GWN7600 with the arrow on the locking tab of the mounting
bracket and ensure that your GWN is rmly seated on the mounting bracket and connect
the network and power cables.
6.T
urn the GWN clockwise until it locks into place and ts the locking tab.
RJ45 Ethernet Cable
to Power over Ethernet
(PoE) Switch
Network
Port
POWERING AND CONNECTING THE GWN7600
GWN7600 can be powered on using PoE switch using following steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of the GWN7600
Step 2: Plug the other end into the uplink port of the power over Ethernet (PoE) switch.
Note: Ceiling mounting is recommended for optimal coverage performance.
bracket and ensure that your GWN7600 is rmly seated on the mounting bracket and connect