Quick Installation Guide

~3~
~4~
Pole Mount
1. Connect the Ethernet cable (RJ45) to the correct ports of your GWN-
7605LR and insert the cover bracket.
2. Connect each antenna to an antenna connector by rotating it clock-
wise.
3. Attach the Base Bracket with screws (PM 3.0 x 7) on the back of
GWN7605LR access point.
1
2
3
4
5
1
2
3
Wall Mount
5
6
4. Drill four holes on the wall referring to the positions of the ones on the
Base Bracket. Then, x an expansion screw in each hole.
5. Attach the GWN7605LR access point by securing the Base Bracket
with the expansion screws on the wall.
Wall
1. Connect the Ethernet cable (RJ45) to the correct ports of your GWN-
7605LR and insert the cover bracket.
2. Connect each antenna to an antenna connector by rotating it clock-
wise.
3. Attach the Base Bracket with screws (PM 3.0 x 7) on the back of
GWN7605LR access point.
4. Open the metal straps by turning the locking mechanism count-
er-clockwise. You can loosen it by hand or use a athead screwdriver.
5. Straighten out the end of the metal straps and slide it through the back
of the base bracket.
6. Wrap the metal strap around the pole and use a athead screwdriver
to tighten the locking mechanism by turning it clockwise.
Pole
Wall