Quick Installation Guide
~5~
~6~
CONNECT T
O GWN7630 DEFAULT Wi-Fi NETWORK
GWN7630 can be used as standalone access point out of box, or after
factory reset with Wi-Fi enabled by default.
After
powering the GWN7630 and connecting it to the network, GWN7630
will broadcast a default SSID based on its MAC address GWN[MAC’s
last 6 digits] and a random password.
Note: GWN7630’s default SSID and password information are printed
on the MAC tag of the unit.
A
computer connected to the GWN7630’s SSID, or to the same network
as the GWN7630 can discover and access its conguration interface us-
ing one of the below methods:
Method 1: Discover GWN7630 using its MAC Address
1. Locate the MAC address on the
MAC tag of the unit, which is on the
underside of the device, or on the package.
2. From a computer connected to same network as the GWN7630, type
in following
address using GWN7630’s MAC address on your browser
https://gwn_<mac>.local
Example: If a GWN7630 has the MAC address 00:0B:82:8C:4D:F8, this
unit can be accessed by typing https://gwn_000b828c4df8.local on the
browser.
Method 2: Discover GWN7630 using GWN Discovery Tool
1. Download and install GWN Discovery T
ool from the following link:
http://www.grandstream.com/tools/GWNDiscoveryTool.zip
2. Open the GWN DiscoveryT
ool, and click on Scan.
A
CCESSING THE CONFIGURATION INTERFACE
4
5
4. Connect the Ethernet cable (RJ45) to the correct ports of your
GWN7630.
5. Align the arrow on the GWN7630AP with the arrow on the locking
tab of the mounting bracket and ensure that your GWN is rmly
seated on the mounting bracket and connect the network and power
cables.
6. Turn the GWN clockwise until it locks into place and ts the locking
tab.
6
GWN7630
48V 0.5A GigE POE
WiFi
,and
630
Ma de in Ch ina