Users Manual Part 1

~1~
~2~
OVERVIEW
The GWN7664 is a high-e󰀩ciency, enterprise-grade 802.11ax Wi-Fi 6
access point, ideal for small-to-medium sized businesses, multiple oor
buildings, residential settings and commercial locations. It o󰀨ers dual-
band 4x4:4 MU-MIMO with DL/UL OFDMA technology and a sophisti-
cated antenna design for maximum network throughput and expanded
Wi-Fi coverage range. To ensure easy installation and management,
the GWN7664 uses a controller-less distributed network management
design in which the controller is embedded within the product’s Web
user interface. The GWN7664 is also supported by GWN.Cloud and
GWN Manager, Grandstream’s cloud and on-premise Wi-Fi manage-
ment platform. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deployments
and o󰀨ers a seamless connection with Grandstream’s Wi-Fi capable
IP phones. With support for advanced QoS, low-latency real-time ap-
plications, mesh networks, captive portals, 512 concurrent clients per
AP and dual Gigabit network ports with PoE/PoE+, GWN7664 is an
ideal Wi-Fi access point for medium wireless network deployments with
medium-to-high user density.
PACKAGE CONTENTS
GWN7664 PORTS
POWERING AND CONNECTING THE GWN7664
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to 50 °C for
operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7664 to environments outside of the following humid-
ity range: 10-90% RH (non-condensing).
• Do not power cycle your GWN7664 during system boot up or rmware up-
grade. You may corrupt rmware images and cause the unit to malfunction.
GWN7664 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7664.
EN
1x GWN7664
Access Point
1x Mounting
Bracket
1x Ceiling
Mounting Bracket
3x Screw
(PM 3 x 50)
3x Screw
(PA 3.5 x 20)
3x Plastic
Expansion Bolt
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
NET Ethernet RJ45 port (10/100/1000Mbps) to your rout-
er or another GWN76xx.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
Network Port
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch
1 x Quick Installation Guide
3x M3 NUT
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
HARDWARE INSTALLATION
GWN7664 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.