User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 19 of 110
GETTING STARTED
This section provides information about using the LCD menu, LED indicators and Web GUI of the
UCM6102/UCM6104/UCM6108/UCM6116. The last section describes how to make your first call using the
UCM6102/UCM6104/UCM6108/UCM6116 with your SIP phone.
USING THE LCD MENU
 Default LCD Display
By default, when the device is powered on, the LCD will show device model, hardware version and IP
address.
 Menu Access
Press "Down" or "OK" button to start browsing menu options.
 Menu Navigation
Press the "Down" arrow key to browser different menu options. Press the "OK" button to select an
entry.
 Exit
There is "Back" option in the menu. Select it to go back to previous menu. Also, the LCD will come
back to default display after being idle in menu for more than 20 seconds.
The following table shows the LCD menu options.
Table 4: LCD MENU OPTIONS
View Events
 Critical Events
 Other Events
Device Info
 Hardware: Hardware version number
 Software: Software version number
 P/N: Part number
 MAC: MAC address
 Uptime: System up time
Network Info
 Mode: DHCP, Static IP, or PPPoE
 IP: IP address
 Subnet Mask
Network Menu
 LAN Mode: Select LAN mode as DHCP, Static IP or PPPoE