User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 24 of 110
 EAP-TLS
 EAP-PEAPv0/MSCHAPv2
Identity
Enter 802.1X mode identity information.
MD5 Password
Enter 802.1X mode MD5 password information.
802.1X Certificate
Select 802.1X certificate from local PC and then upload.
802.1X Client
Certificate
Select 802.1X client certificate from local PC and then upload.
Table 8: UCM6102 NETWORK SETTINGS
Settings -> Network Settings -> WAN
IP Method
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
IP Address
Enter the IP address for static IP settings.
Gateway IP
Enter the gateway IP address for static IP settings.
Subnet Mask
Enter the subnet mask address for static IP settings.
DNS Server 1
Enter the DNS server 1 address for static IP settings.
DNS Server 2
Enter the DNS server 2 address for static IP settings.
User Name
Enter the user name to connect via PPPoE.
Password
Enter the password to connect via PPPoE.
Preferred DNS Server
Enter the preferred DNS server address.
Settings -> Network Settings -> LAN
Mode
Select LAN port mode as Router or Switch.
IP Address
Enter the IP address assigned to the LAN port.
Subnet Mask
Enter the subnet mask.
DHCP Server Enable
Enable or disable DHCP server capability.
DNS Server 1
Enter DNS server address 1.
DNS Server 2
Enter DNS server address 2.
Allow IP Address
From
Enter the IP Pool starting address.
Allow IP Address To
Enter the IP Pool ending address.
Default IP Lease Time
Enter the IP lease time (in seconds).
Settings -> Network Settings -> 802.1X
802.1X Mode
Select 802.1X mode. The default setting is "Disable". The supported 802.1X
mode are:
 EAP-MD5