User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 25 of 110
 EAP-TLS
 EAP-PEAPv0/MSCHAPv2
Identity
Enter 802.1X mode identity information.
MD5 Password
Enter 802.1X mode MD5 password information.
802.1X Certificate
Select 802.1X certificate from local PC and then upload.
802.1X Client
Certificate
Select 802.1X client certificate from local PC and then upload.
Settings -> Network Settings -> Port Forwarding
WAN Port
Specify the WAN port number. Up to 8 ports can be configured.
LAN IP
Specify the LAN IP address. Up to 8 IP address can be configured.
LAN Port
Specify the LAN port number. Up to 8 ports can be configured.
Protocol Style
Select protocol type for the forwarding in the selected port.
NETWORK SECURITY SETTINGS
The UCM6102/UCM6104/UCM6108/UCM6116 provides users Firewall configurations to prevent certain
malicious attack to the device system, allow, restrict or reject specific traffic through the device for security
and bandwidth purpose. Go to Web GUI->Settings->Network Settings->Security page, users will see the
current service information with Port, Process and Type, as well as Firewall settings.
Figure 10: Current Service
Users could configure the following options for the Firewall settings.
 Interface. Select the interface (LAN/WAN) For firewall settings.