User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 31 of 110
is enabled, the access using HTTP with Port 80 will be redirected to
HTTPS with Port 8089. The default setting is "Enable".
Protocol Type
Select HTTP or HTTPS. The default setting is "HTTPS".
Port
Specify port number to access the HTTP server.
Once the change is saved, the web page will be redirected to the login page using the new URL. Enter the
username and password to login again.
EMAIL SETTINGS
The Email application on the UCM6102/UCM6104/UCM6108/UCM6116 can be used to send out Emails to
users with Fax (e.g., Fax-To-Email), Voicemail (Voicemail-To-Email) and other information as attachment.
The configuration parameters can be accessed via Web GUI->Settings->Email Settings.
Table 11: Email Settings
TLS Enable
Enable or disable TLS during transferring/submitting your Email to other
SMTP server. The default setting is "Yes".
Type
Select Email type.
 MTA: Mail Transfer Agent. The Email will be sent from the
configured domain. When MTA is selected, there is no need to set
up SMTP server for it or no user login is required. However, the
Emails sent from MTA might be considered as spam by the target
SMTP server.
 Client: Submit Emails to the SMTP server. A SMTP server is
required and users need login with correct credentials.
Domain
Specify the domain name to be used in the Email.
TIME SETTINGS
The current system time on UCM6102/UCM6104/UCM6108/UCM6116 can be checked under Web
GUI->Status->System Status. To change the time settings, go to Web GUI->Settings->Time Settings.
Table 12: Time Settings
NTP Server
Specify the URL or IP address of the NTP server for the PBX to
synchronize the date and time. The default NTP server is
ntp.ipvideotalk.com.
Enable DHCP Option 2
If set to "Yes", the device is allowed to get provisioned for Time Zone