User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 37 of 110
Users could also directly create a new device and assign the extension at one time. Click on "Create New
Device" and the following window will be popped out. Fill in the MAC address or IP address, and then select
the extension to assign to the device. Click on "Save" to add the device to the provision list.
Figure 19: Create New Device
PROVISIONING
After the discovery and assignment, reboot the device. It will download the config file and get provisioned
with the assigned extension registered.
EXAMPLES
Depending on the topology, the discovery and provisioning can be done in different ways.
Example 1: