User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 40 of 110
EXTENSIONS
CREATE NEW USER
To manually create new user, go to Web GUI->PBX->Basic/Call Routes->Extensions. Click on "Create
New User" and a new window will show to fill in the details. The configuration parameters are as follows.
Table 14: Extension Configuration Parameters
General
Extension
The extension number associated with the user.
CallerID Name
Configure the CallerID Name associated with the user. Number, letter,
or space are allowed.
CallerID Number
Configure the CallerID Number that would be applied for outbound calls
from this user.
Note:
The ability to manipulate your outbound Caller ID may be limited by your
VoIP provider.
Permission
Select permission for the user. The available permissions are Internal,
Local, National and International. The default permission is Internal.
SIP/IAX Password
Configure the password for the user. A random secure password will be
automatically generated. It is recommended to use this password for
security purpose.
Enable Voicemail
Enable Voicemail for the user. The default setting is enabled.
Voicemail Password
Configure Voicemail password (digits only). A random numeric
password is automatically generated.
Email Address
Fill in the Email address for the user.
Call Forward Unconditional
Configure the Call Forward Unconditional target number. If not
configured, the Call Forward Unconditional feature is deactivated.
Call Forward No Answer
Configure the Call Forward No Answer target number. If not configured,
the Call Forward No Answer feature is deactivated.
Call Forward Busy
Configure the Call Forward Busy target number. If not configured, the
Call Forward Busy feature is deactivated.
Ring Timeout
Configure the number of seconds to ring the user before sending to the
user's voicemail (if enabled) or hangup. The default setting is 60
seconds.
Technology