User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 42 of 110
 Only local subnets
Only the user in specific subnet can register using the extension. Up
to three subnet can be specified.
 A specific IP Address.
Only the device on the specific IP address can register using the
extension.
The default setting is "Allow all".
Disable Password
If set to Yes, when dialing out with outgoing rules, the user doesn't need
enter the password.
Codec Preference
Select audio and video codec for the user. The available codecs are:
PCMU, PCMA, GSM, G.726, G.722, G.729, G.723, ILBC, ADPCM,
LPC10, H.264, H.263, H.263p.
BATCH ADD EXTENSIONS
Under Web GUI->PBX->Basic/Call Routes->Extensions, click on "Batch Add Extensions" to start adding
extensions in batch.
Table 15: Batch Add Extension Parameters
General
Start Extension
The starting extension number.
Create Number
The number of extensions to be added.
Permission
Select permission for the user. The available permissions are Internal,
Local, National and International. The default permission is Internal.
Enable Voicemail
Enable Voicemail for the user. The default setting is enabled.
SIP/IAX Password
Configure the SIP/IAX password for the users.
 User Random Password.
A random secure password will be automatically generated. It is
recommended to use this password for security purpose.
 Use Extension as Password.
 Enter a password to be used.
Voicemail Password
Configure Voicemail password (digits only) for the users.
 User Random Password.
A random password in digits will be automatically generated. It is
recommended to use this password for security purpose.
 Use Extension as Password.
 Enter a password to be used.