User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 51 of 110
 Click on to delete the inbound route.
Table 19: Inbound Route Configuration Parameters
Trunks
Select the trunk to configure the inbound route.
DID Pattern
 All patterns are prefixed with the "_".
 X: Any Digit from 0-9.
 Z: Any Digit from 1-9.
 N: Any Digit from 2-9.
 ".": Wildcard. Match one or more characters.
 "!": Wildcard. Match zero or more characters immediately.
Example:
[12345-9]: Any digit from 1 to 9.
Privilege Level
Select privilege level for the inbound rule.
 Local: The lowest level required. All users can use this rule.
 National: Users with National level or International level are allowed
to use this rule.
 International: The highest level required. Only users with
international level can use this rule.
Default Destination
Select the default destination.
 Extension
 Extension's voicemail
 Call Queue
 Conference Room
 Operator
 Hangup
 Voicemail Dial Code
 Congestion
 Local Extension by DID
Time Condition
Start Time
Select the start time hour:minute for the trunk to use the inbound rule.
End Time
Select the end time hour:minute for the trunk to use the inbound rule.
Date
Select "By Week" or "By Day" and specify the date for the trunk to use
the inbound rule.
Destination
Select the destination when the inbound rule is used at the configured
time range..
 Extension
 Extension's voicemail